Hi Everyone! My situation is the following: I understood that the Van Rysel D100 is compatible with the zwift cog&click (as they sell it together). Unfortunately, the zwift version D100 was out of stock at that time. For that reason, I bought the standard non-zwift version of the D100 and the upg…

I found several discussion thread on this topic. It seems that it is a specific issue on D100, may be since the last firmware update. I cannot confirm because I had not tested it with the previous firmware. But, I made a test with OneLap, (not OneLapFit), which is similar to ZWIFT (but less good). …

Who can update their van Rysel d100 to the latest version? It’s not possible for me. My version is still 0.100. The OnelapFit app won’t let me use it!

I found the application OneLap Utility in the app store, I will try to update the firmware this afternoon ande let you know here on the forum!

I also have this issue after the Update :frowning: Is there already a solution found?

I finally have the update now (Austria)! Everything seems to be working fine, I can finally use my Zwift Cog and Click

I have a unit I picked up today. Firmware 0.106. Works fine for ERG mode as an FTP test. Otherwise it’s not talking to Zwift to manage resistance. I can spin up to only about 120 watts and 95 RPM and no change in resistance on free rides even on the hill only routes. Set resistance in Zwift to max a…

To have the resistance in Zwift : launch Zwift and connect your D100, then launch a run don’t close zwift application, go to the Bluetooth setting menu of your phone, then shutdown the bluetooth. Wait few secondes, then restart bluetooth go back to Zwift application, reconnect D100, then go back t…

No luck. I tried turning off all Bluetooth devices that may be interfering. Tried Zwift from my iPhone - no resistance but power, speed, cadence all work. Tried the OneLapFit app - records data for speed, cadence, and can control resistance level but slope adjustment does nothing Rode a Zwift wor…

Hi, I have the same setup as you, it works fine for me. Of course I updated the software to 1.0.6, set the power source to van rysel, and upgraded the software on the click button. If it doesn’t work for you, try recalibrating, unplugging everything, and then starting over again.

Zwift Click connection issues with Van Rysel D100

Zwift Shop Zwift Equipment

Marco_Casaroli (Marco) January 1, 2025, 10:15pm 37

Have you update the onelap app??

Topic		Replies	Views
D500 van rysel - Zwift cog and click upgrade Bugs and Support	10	3290	February 11, 2025
Zwift Click not connecting Zwift Equipment	122	18997	January 19, 2025
Announcing New Zwift Click and Zwift Cog Bundle [September 2025] Zwift Equipment	49	2206	March 9, 2026
Van Rysel D100 Zwift Equipment	2	892	December 23, 2024
Van Rysel D100 - No resistance on SIM mode Bugs and Support	29	2081	October 26, 2025

Zwift Click connection issues with Van Rysel D100

Related topics