Can't find Cycleops JetFluid Pro - What to do?

The Archives Archived: Tips and Troubleshooting
1

Hi Folks,

I have a Cyclops Jetfluid Pro which seems to be supported, but i can’t select int the list when pairing, its not there.

https://support.zwift.com/hc/en-us/articles/203152565-Which-trainers-does-Zwift-support-

he following classic trainer models are compatible with Zwift’s Virtual Power curve:

  • CycleOps JetFluid Pro
2

Are you searching under the speed + classic trainer menu? You need to have an ANT+ or BLE speed sensor and search under that menu to see the classic trainer list.

3

Correct. Only fluid 2 and fluid show up, no fluid pro. I opened a support ticket as well and provided some screenshots.

4

Hi Jason,

Should i be seeing a CycleOps JetFluid Pro or should just use the CycleOps JetFluid.  Also, what is the recommend Virtual Power Mode for either of these, zPower or Classic?

Thanks.

 

5

Look at the power curve for the Pro - no wonder it is harder - I don;'t think they have the power curve set right in Zwift.  https://www.cycleops.com/Uploads/Cycleops/2015/2/JetFluid-2.jpg