This happens to me also on ATV. When I finish a workout it’s like ERG mode is still on until I end the session. If I remember I’ll manually turn ERG mode off before the workout ends if I’m planning to free ride for a while.
2 Likes
Same here Richard. At least I know this is a known issue now and just not isolated to me
1 Like
2 posts were merged into an existing topic: Drops counter stalling and frozen pedestrians [Jan 2023] [1.33]
I’ve experienced the same bug: after being done with an erg workout on Apple TV, you are stuck at that last erg power level when you start anything else afterwards (typically before shutting down Zwift but I’ve even had it when starting Zwift the following day)
1 Like
Months have passed… the promised fix for the notable moments photos overriding user settings STILL has not been repaired. Users need to manage hard drive space for hundreds of downloaded photos that have not bern asked for from Zwift. When will this be fixed?
The user settings are a core function of the product. They should work as described. Radio silence from Zwift since the original acknowledgment… Disappointing…
3 Likes
2 posts were merged into an existing topic: Drops counter stalling and frozen pedestrians [Jan 2023] [1.33]
Thank you, @Richard_Barnhill, this device info is helpful. In particular, the ANT+ info.
I have just verified ERG mode working in the “Emily’s Short Mix” workout on both PC and Mac. But that was using Bluetooth connections (both Native BLE and with using the Zwift Companion BLE Bridge).
I’ll switch to ANT+ and report back.
2 Likes
Haven’t tried ERG yet, but it appeared that road feel wasn’t working in my ride after the update. Was on the cobbles of the Champs and didn’t feel anything. Verified that the feature is turned on. Anyone else?
Neo 2T; current firmware. Connected through Ant+ running on Win10-based PC.
1 Like
60 Million.
Lets’ see. 114 days since Holoreplays launched. Average ride distance in 2022 is 28.5km. Total ride distance in 2022 is 1.341 billion kms so the total rides would be around 47,073,868. Avg distance and total ride distance taken from a Zwift facebook page about 2022 stats.
Now we start guestimating things. Straight adjusting for 114 days that’s 14,702,523 rides but I’m going to round that up to an even 20,000,000 because it’s peak season so things are a lot busier now.
Let’s say there’s an average of 3 segments per ride (the most popular route is Tempus Fugit and riding 28.5km on that route you will pass through 3 segments). 20 million rides times 3 segments per ride makes my guess 60 million HoloReplays.
4 Likes
During my SST workout tonight, I was on Tempis Fugit, so not a ton of elevation, but I could “feel” the little bump on the middle of the desert and the power responded, so I think the trainer is working properly. Also, my output and HR relative to that output felt right.
I just ran the update and did TDZ stage 5. It’s like the trainer difficulty had set to 0. I was spinning out uphill and having to push really hard downhill. Checked settings, apparently set to the usual 50%. Shut down and went back in. Still not right. Anyone else got this problem?
1 Like
It sounds like I have a similar issue to others. My trainer resistance is still set to max (like before), but zwift is not controlling resistance with gradient changes.
- KICKR v5, up to date firmware
- running on a Windows PC
- ANT+ connection to trainer
Attempted fixes so far:
- restarted zwift
- uninstalled and reinstalled zwift
- unplugged, then replugged trainer
- checked firmware on trainer
- restarted PC
4 Likes
Same here. KICKR and Climb with ANT+ dongle on PC. It’s behaving as if trainer difficulty is set to 0. No variability in resistance and no movement on the Kickr Climb.
1 Like
Quick update: I switched my trainer connection to Bluetooth instead of ANT and it immediately fixed the issue. So it looks like ANT is likely the problem.
3 Likes
For all OS platforms?
I can’t even install Zwift on OS as it’s not available for older models!
The first line of the announcement is referring to all supported OS.
It’s great that HoloReplays have been added for full routes but why doesn’t it indicate in the ride results when you’ve achieved a new PR for that route? There is an indicator during the ride but not afterwards in the results. I rode two laps of Sand and Sequoias today, PR’d on lap two and it would be great to have that reflected in the ride results. Thanks.
1 Like
Trainer resistance working backwards. Less resistance uphill and more downhill.
Running on PC (Win10 with latest updates), Kickr V5, ANT+, Companion on android 13 phone.
And no drops here either.
1 Like
@Gerrie_Delport_ODZ @shooj It looks like this is a pretty widespread issue. Might want to make a separate thread for this one.
3 Likes
