# FTP

**URL:** <https://forums.zwift.com/t/ftp/1463>\
**Category:** Archived: Zwift Feedback\
**Created:** [January 8, 2018, 10:00pm UTC](https://forums.zwift.com/t/ftp/1463 "2018-01-08T22:00:50Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mark\_Greig](https://avatars.discourse-cdn.com/v4/letter/m/aca169/32.png) [@Mark\_Greig](https://forums.zwift.com/u/Mark_Greig)\
**Post date:** [January 8, 2018, 10:00pm UTC](https://forums.zwift.com/t/ftp/1463/1 "2018-01-08T22:00:50Z")

</div>

I’m new to zwift and have started the 4wk FTP booster. Having carried out the FTP test it came back at 257. I am now on week two of the plan and struggling to hit the power/cadence target set on the workout.  
I did the test via Bluetooth connection and started the 4 week plan on an ant+ connection. The Bluetooth connection picks up the misuro power sensor. I now pick up the speed sensor on my elite super Crono smart+ turbo through ant+. The speeds and cadence are true as I have had my garmin 500 running but wondered if the power output recorded via Bluetooth connection was slightly higher than it should be.  
I know that the simple thing would be to do the ftp test connected to ant+. But has anyone found any differences between the power readings from different connection. I run zwift through my MacBook.

---

<div class="post-metadata">

**Author:** ![Graham\_Stobbs](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/graham_stobbs/32/362352_2.png) [@Graham\_Stobbs](https://forums.zwift.com/u/Graham_Stobbs)\
**Post date:** [January 9, 2018, 1:57pm UTC](https://forums.zwift.com/t/ftp/1463/2 "2018-01-09T13:57:33Z")

</div>

Hi Mark, I had similar issues when I transferred from Trainer Road. I started zwift with my trainer road ftp number and struggled like hell. If you did the ftp test using data from a power meter and you are now using estimated power there will be a difference. Even 5 rpm makes a bike difference on my elite fluid power trainer. My advice is to run the test again using ant+ and the speed / cadence sensor. This should get you back on track. Regards, Graham.

---

<div class="post-metadata">

**Author:** ![Alex\_Pond](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/alex_pond/32/510030_2.png) [@Alex\_Pond](https://forums.zwift.com/u/Alex_Pond)\
**Post date:** [January 10, 2018, 11:55am UTC](https://forums.zwift.com/t/ftp/1463/3 "2018-01-10T11:55:32Z")

</div>

Even if you don’t know your ftp you can still estimate over a few weeks of completing workouts.&nbsp; If you can’t finish the workout because it is too hard, reduce your ftp number, if it is too easy, increase your ftp number.&nbsp; You should be able to complete the workouts and feel like you have a little bit of energy left at the end.&nbsp; Once your ftp number is correct, the workouts should be challenging but you should be able to finish them.
