Change in the Zwift Companion App to 600W+ total time

Feature Requests
1

Can you please change the time in the power zones so it doesn’t just cut-off at 600W.

If you don’t want to expand the horizontal axis then please just make the existing 600W limit a 600W+ so it just adds up ALL the time you spent at 600W or more, i.e. right out to 1200W and beyond.

I would like to see my total accumulated sprint duration for a ride.

The Companion App needs a few more unique features that are not available on the PC so it improves the total uptake and usage of the App, I’m still surprised at how few people use it.

2

I’m somewhat surprised it doesn’t do this to be honest. This would be fine for me, have a 600+ section… i don’t spend a lot of time above that personally.

3

Just seems logical to me, shouldn’t all the individual times in each power zone just add up to your total ride time ???

You can obviously see the MAX Watts you hit during the ride, but this is not really that useful because its just a peak for as short as like 1 second, looks good but doesn’t tell you that you just held like 700W for a full 30 second sprint getting a new PB.

4

Trust me … link your account to intervals.icu and you can analyse individual sprints one by one.

Zwift can’t do everything. What you’re asking for isn’t going to tell you much anyway, I think.

5

I just want to keep it simple, its easy for Zwift to make the change to the App.

Don’t want to start in depth analysis, just want to know my total time for the ride spent at 600W and over as I swipe past that screen.

6

OK … but you could have the data today (and lots more good stuff besides) for minimal effort and potentially zero expense.

I wouldn’t be holding my breath in anticipation of Zwift addressing your issue, if I were you.

7

Its a 10 minute job. The numbers are already there you just add up all the times for anything over 600W.

8

1000007117
1000007117864×1872 200 KB

1000007118
1000007118864×1872 200 KB

The job is already done - look at the activity in Companion app, there are the times in 25 W steps.

9

I’m not following you, its not done the power stops at 600W so anything above that is not shown.

You either take the scale out to say 1000W or you just change the 600W to 600W+ and total all the time over 600W and put it in that column.

Anything over 600W is pretty much a sprint so just after my total time for a ride in a column which is currently useless and blank and will go to at least a minute or even 2 minutes so it will spike there instead of a useless blank.

574W for me is never a maximum power output for a ride, I can hit 1000W and do sustained sprints at over 600W.

10

Ok, sorry, I didn’t check it stops @ 600 W.