# Calibration Tacx Vortex Smart

**URL:** <https://forums.zwift.com/t/calibration-tacx-vortex-smart/219335>\
**Category:** General Discussion\
**Created:** [January 26, 2020, 10:25pm UTC](https://forums.zwift.com/t/calibration-tacx-vortex-smart/219335 "2020-01-26T22:25:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Piotr\_Legutko](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/piotr_legutko/32/120508_2.png) [@Piotr\_Legutko](https://forums.zwift.com/u/Piotr_Legutko)\
**Post date:** [January 26, 2020, 10:25pm UTC](https://forums.zwift.com/t/calibration-tacx-vortex-smart/219335/1 "2020-01-26T22:25:20Z")

</div>

Hi everyone,  
I’m new so please be forgiving.  
Should calibration of the Vortex Smart trainer be done only in the Tacx App or on ZWIFT? or maybe both? Please clarify this issue. Thanks

---

<div class="post-metadata">

**Author:** ![Gerrie\_Delport\_ODZ](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/gerrie_delport_odz/32/437556_2.png) [@Gerrie\_Delport\_ODZ](https://forums.zwift.com/u/Gerrie_Delport_ODZ)\
**Post date:** [January 26, 2020, 10:33pm UTC](https://forums.zwift.com/t/calibration-tacx-vortex-smart/219335/2 "2020-01-26T22:33:07Z")

</div>

Hi @Piotr_Legutko Welcome to the Zwift forum.

Always better to calibrate with the trainer App.

---

<div class="post-metadata">

**Author:** ![D\_Watson](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/d_watson/32/414851_2.png) [@D\_Watson](https://forums.zwift.com/u/D_Watson)\
**Post date:** [January 27, 2020, 1:39am UTC](https://forums.zwift.com/t/calibration-tacx-vortex-smart/219335/3 "2020-01-27T01:39:15Z")

</div>

@Piotr_Legutko I have a Vortex and I’ve never calibrated it through Zwift. I always use the Tacx app on my phone. You need to close Zwift before running the calibration (if doing over Bluetooth) as you can only have 1 active BLE connection.

I usually run the calibration once a week after a ride so the tire is warm.

---

<div class="post-metadata">

**Author:** ![Piotr\_Legutko](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/piotr_legutko/32/120508_2.png) [@Piotr\_Legutko](https://forums.zwift.com/u/Piotr_Legutko)\
**Post date:** [January 27, 2020, 10:53am UTC](https://forums.zwift.com/t/calibration-tacx-vortex-smart/219335/4 "2020-01-27T10:53:48Z")

</div>

I am asking because I noticed differences in load when driving on zwift. For Zwift calibration the load is less than for Tacx.
