# Calibrate direct connected Treadmill (via bluetooth)

**URL:** <https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712>\
**Category:** Running\
**Created:** [December 2, 2023, 8:04am UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712 "2023-12-02T08:04:41Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Andreas\_Fitz](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/andreas_fitz/32/503905_2.png) [@Andreas\_Fitz](https://forums.zwift.com/u/Andreas_Fitz)\
**Post date:** [December 2, 2023, 8:04am UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/1 "2023-12-02T08:04:41Z")

</div>

Is there a in-game way to calibrate a connected treadmill that sends the speed to zwift?

I cannot calibrate my horizon paragon x treadmill (which is directly connected to zwift as a speedsensor), but i know from my stryd it’s about 0.6km/h too slow.

I want to use it as the speedsensor because it does also record incline to strava,which stryd doesn’t.

Thanks.

---

<div class="post-metadata">

**Author:** ![Kev\_Lewis](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/kev_lewis/32/536622_2.png) [@Kev\_Lewis](https://forums.zwift.com/u/Kev_Lewis)\
**Post date:** [December 2, 2023, 8:21am UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/2 "2023-12-02T08:21:50Z")

</div>

If the data being transmitted by your treadmill doesn’t match the belt speed I don’t think there’s anything you can do about it in game. Sounds like you need to get an engineer to calibrate your treadmill.

---

<div class="post-metadata">

**Author:** ![Andreas\_Fitz](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/andreas_fitz/32/503905_2.png) [@Andreas\_Fitz](https://forums.zwift.com/u/Andreas_Fitz)\
**Post date:** [December 2, 2023, 9:16am UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/3 "2023-12-02T09:16:54Z")

</div>

I did that, no way to do it they said.  
Just want to say zwift 10.6km/h is 10.0km/h.  
Like it’s possible with a stryd or so…  
But when you connect the treadmill the calibrate symbol is not there. Would be fine to do something like this, an easy way to calibrate a treadmill.

---

<div class="post-metadata">

**Author:** ![Stuart.Middlecoate](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/stuart.middlecoate/32/539453_2.png) [@Stuart.Middlecoate](https://forums.zwift.com/u/Stuart.Middlecoate)\
**Post date:** [December 2, 2023, 1:50pm UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/4 "2023-12-02T13:50:10Z")

</div>

You can normally increase belt speed versus reported speed by adjusting the voltage going to the motor. There will be a little adjuster wheel on the main circuit board. Give that a little turn and it’ll increase power to the motor.

---

<div class="post-metadata">

**Author:** ![Andreas\_Fitz](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/andreas_fitz/32/503905_2.png) [@Andreas\_Fitz](https://forums.zwift.com/u/Andreas_Fitz)\
**Post date:** [December 2, 2023, 3:47pm UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/5 "2023-12-02T15:47:44Z")

</div>

Ok thanks, i will give that a try.  
Could there be any danger of getting the treadmill wrecked this way?

---

<div class="post-metadata">

**Author:** ![Andreas\_Fitz](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/andreas_fitz/32/503905_2.png) [@Andreas\_Fitz](https://forums.zwift.com/u/Andreas_Fitz)\
**Post date:** [December 2, 2023, 4:00pm UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/6 "2023-12-02T16:00:49Z")

</div>

Just looked out for anything to adjust here, can’t find anything.

---

<div class="post-metadata">

**Author:** ![Stuart.Middlecoate](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/stuart.middlecoate/32/539453_2.png) [@Stuart.Middlecoate](https://forums.zwift.com/u/Stuart.Middlecoate)\
**Post date:** [December 2, 2023, 4:42pm UTC](https://forums.zwift.com/t/calibrate-direct-connected-treadmill-via-bluetooth/617712/7 "2023-12-02T16:42:29Z")

</div>

No, it’s how they are set and adjusted by the manufacturer.
