# Ant+ vs Bluetooth

**URL:** <https://forums.zwift.com/t/ant-vs-bluetooth/612482>\
**Category:** General Discussion\
**Created:** [September 28, 2023, 6:34pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482 "2023-09-28T18:34:38Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![D\_Frim9510](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/d_frim9510/32/513773_2.png) [@D\_Frim9510](https://forums.zwift.com/u/D_Frim9510)\
**Post date:** [September 28, 2023, 6:34pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/1 "2023-09-28T18:34:38Z")

</div>

Which type of connection to PC do you recommend ?  
Is there any difference when ride in ERG mode because the BLE standard is faster?

---

<div class="post-metadata">

**Author:** ![Martin\_Reading](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/martin_reading/32/481639_2.png) [@Martin\_Reading](https://forums.zwift.com/u/Martin_Reading)\
**Post date:** [September 28, 2023, 7:06pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/2 "2023-09-28T19:06:44Z")

</div>

I use Bluetooth, I’ve used Ant+ in the past, but misplaced the Ant+ dongle, and bluetooth is built into the network card in my laptop

---

<div class="post-metadata">

**Author:** ![Milan\_Rost](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/milan_rost/32/407827_2.png) [@Milan\_Rost](https://forums.zwift.com/u/Milan_Rost)\
**Post date:** [September 28, 2023, 7:15pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/3 "2023-09-28T19:15:29Z")

</div>

Using both ANT+ and BLE I could not find any difference. Tacx Neo, P2M NG eco powermeter, PC with ANT+ or BLE dongle (placed max 30 cm from trainer/powermeter).

---

<div class="post-metadata">

**Author:** ![Gerrie\_Delport\_ODZ](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/gerrie_delport_odz/32/437556_2.png) [@Gerrie\_Delport\_ODZ](https://forums.zwift.com/u/Gerrie_Delport_ODZ)\
**Post date:** [September 28, 2023, 7:26pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/4 "2023-09-28T19:26:28Z")

</div>

I have used both and found no difference in speed. I prefer ANT+ because I find it more stable.

---

<div class="post-metadata">

**Author:** ![oldnapalm](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/oldnapalm/32/527041_2.png) [@oldnapalm](https://forums.zwift.com/u/oldnapalm)\
**Post date:** [September 28, 2023, 7:33pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/5 "2023-09-28T19:33:11Z")

</div>

I prefer BLE over ANT because the resistance changes are more responsive, it’s very noticeable on rolling terrains like titan’s grove and watopia’s sprint (the esses), using ANT there’s a delay and with BLE it’s very smooth (both with USB extension cable and the stick very close to the trainer). I don’t use ERG though, can’t tell if there’s any difference in this case.

But it may be something with my trainer (Elite Suito) and not with the protocol itself, I never used a different smart trainer.

---

<div class="post-metadata">

**Author:** ![chris\_benten1](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/chris_benten1/32/521487_2.png) [@chris\_benten1](https://forums.zwift.com/u/chris_benten1)\
**Post date:** [September 28, 2023, 8:00pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/6 "2023-09-28T20:00:46Z")

</div>

Ant+ is, for me, a stronger, more stable signal. I have Garmin dongles from years ago. Most of the time BT is more responsive but recently I have noticed lags on incline changes, long enough that I had to check I was still not on Ant+. I use a laptop with builtin BT…I will say that older laptops, BT is awful which is why I used Ant+. My “new” laptop is now 3 years old (I7-10750H) and is stable enough I do not not need to use Ant+.

---

<div class="post-metadata">

**Author:** ![Chris\_Holton](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/chris_holton/32/506684_2.png) [@Chris\_Holton](https://forums.zwift.com/u/Chris_Holton)\
**Post date:** [September 28, 2023, 9:03pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/7 "2023-09-28T21:03:47Z")

</div>

> [@oldnapalm](#):
>
> I prefer BLE over ANT because the resistance changes are more responsive, it’s very noticeable on rolling terrains like titan’s grove and watopia’s sprint (the esses), using ANT there’s a delay and with BLE it’s very smooth (both with USB extension cable and the stick very close to the trainer). I don’t use ERG though, can’t tell if there’s any difference in this case.

this is what i find too, across multiple different trainers and PCs/laptops

I also find erg mode much better with bluetooth

---

<div class="post-metadata">

**Author:** ![Paul\_Southworth](https://sea2.discourse-cdn.com/gozwift/user_avatar/forums.zwift.com/paul_southworth/32/538336_2.png) [@Paul\_Southworth](https://forums.zwift.com/u/Paul_Southworth)\
**Post date:** [September 28, 2023, 9:50pm UTC](https://forums.zwift.com/t/ant-vs-bluetooth/612482/8 "2023-09-28T21:50:22Z")

</div>

I like to have both. One is the built-in Bluetooth in my laptop, and the other is a US$19 Coospo ANT+ dongle (includes extension lead). Sometimes software or trainer bugs create a reason to switch. I find pairing is quicker with ANT+ and when everything is working properly that’s the only difference I notice.
